IBM LAN Support Program: installing the NDIS2 driver

IBM LAN Support Program:
installing the NDIS2 driver

The Madge NDIS2 driver for DOS is called MCBND.DOS. To install it, follow the instructions below:
  1. Run the IBM DXMAID utility. When asked if you are using driver diskettes answer Yes.
  2. In the Process Driver Diskette box, type the path A:\DOS.
  3. Continue through the installation process choosing the protocols and interfaces you need, and changing any parameters you need to change.
  4. When you have finished, reboot the computer.

[Previous page][Start of section]

[Adapter Installation][Driver Installation][Software Utilities][Additional Information]

____________________