The Ringnode's hardware switches

Some text is printed on the reverse of the board to indicate the function of each of the eight switches in switch block 1. Each individual switch is identified by a pair of numbers. The first number indicates the switch block, and the second number identifies the particular switch within the switch block. For example, switch 1/2 means block 1, switch 2.

Carefully check the requirements of your installation against the list below. The default settings suit most installations. The defaults are:

Configuration item	Controlled by
I/O address 0A20 - 0A2F	Switches 1/1 and 1/2
ROM address CC000 - CDFFF	Switches 1/1 and 1/2
ROM socket disabled	Switch 1/3
Interrupt level 3	Switches 1/4 - 1/7
4Mbit/s network speed	Switch 1/8
STP cabling	Media link block