Table 1.0 The Smart Software and equivalent IBM LSP files
| Purpose | Smart Software files | Equivalent IBM LAN Support Program files |
| LLC interface | SMART.EXE with LLC.SMT | DXMA0MOD.SYS with DXMC0MOD.SYS |
| NetBIOS interface | SMART.EXE with NETB.SMT | DXMA0MOD.SYS with DXMC0MOD.SYS and DXMT0MOD.SYS |
| NDIS2 interface | SMART.EXE with NDIS.SMT | IBMTOK.DOS |
Table 1.1 The Smart Software and eqivalent Novell files
| Purpose | Smart Software files | Equivalent Novell files |
| IPX interface | SMART.EXE with IPX.SMT | IPX.COM |
| ODI interface | SMART.EXE with ODI.SMT | TOKEN.COM |
| TCP/IP Protocols (for NetWare IP and LAN WorkPlace for DOS) | SMART.EXE with TCP.SMT, IP.SMT, UDP.SMT, and NOVAPI.SMT | TCPIP.EXE or WGTCPIP.EXE with LSL.COM and an ODI interface. |
| WinSock interface | SMART.EXE with TCP.SMT, UDP.SMT, IP.SMT, NOVAPI.SMT, VNOVAPI.386, and WINSOCK.DLL | TCPIP.EXE or VTCPIP.386 with LSL.COM, an ODI interface and WINSOCK.DLL |
| Reverse ARP Server program | SMART.EXE with TCP.SMT, IP.SMT, UDP.SMT, NOVAPI.SMT and RARPD.SMT | TCPIP.EXE or WGTCPIP.EXE with LSL.COM, an ODI interface, and RARPD.EXE |
| If you require more NetBIOS resources than Smart NetBIOS provides, use one of the methods described at the end of this chapter for providing a NetBIOS interface, or run the Madge MNETBIOS driver with Smart LLC. |
![[Back]](../../../graphics/back.gif)
![[Top]](../../../graphics/up_gry.gif)
![[Forward]](../../../graphics/fwd_gry.gif)
![[Using Madge Wizard]](../../../graphics/bk_mdgw.gif)
![[Ringnode Installation]](../../../graphics/bk_hw.gif)
![[Driver Installation]](../../../graphics/bk_sw.gif)
![[Ringnode Config and Diag]](../../../graphics/bk_cfg.gif)
![[Additional Information]](../../../graphics/bk_plus.gif)
