Sample SMART.CFG

;---------------------------------------------------------------------------;

[host]                                  
; DISPLAY                   ;    Displays protocols being loaded
; FORCELOAD                 ;    Overloads existing software running
; WIN=31                    ;    Windows Compatability
; HIGH                      ;    Loads software high
; PC3270=101                ;    PC3270 Compatabilty Set correct version

[CARD]                      ;    This Section loads Parameters to card
; PIO                       ;    Avoids DMA problems with memory managers
; LOMEM                     ;    Avoids DMA problems with Programmed I/O Trans.
; FRAME.SIZE=4096           ;    Specifies Frame size for IPX and NetBios
; NODE.ADDRESS=400012345678 ;    Sets the Locally Administerd Address
; SAPS=10                   ;    This is for LLC Service Access Points
; EXTRA.STATIONS=20         ;    This is for Extra Stations
; EXTRA.SAPS=5              ;    This is for Extra Saps

[IPX]                       ;    This section is for IPX 
 SR=Y                       ;    This is for Source Routing
 CO=25                      ;    This is for Connections Default is 3
  
;[NOVAPI]                   ;    This is the host's Interface

;[IP]                       ;    This is for IP addressing
; IP.ADDRESS=193.35.4.21    ;    This is for Host's IP Address
; IP.ROUTER=193.35.4.99     ;    This is for network's Router

;[UDP]                      ;    Please view Info File for more Parms

;[TCP]                      ;    Please View info file for more Parms                                            

;[NETB]                     ;    This Section is for Netbios 
; TX.U.BUFFERS=25           ;    This is for Internal Buffer handling
; S=24                      ;    This is for Netbios Sessions Default is 4
; C=24                      ;    This is for Netbios Commands Default is 10

;[LLC]                      ;    This Section is for IEEE 802.2
; RX.SIZE=2130              ;    Default is frame size is 2130
; PCS                       ;    For PC Support product

;[ODI]                      ;    This section is for ODI 
; FRAME TOKEN-RING          ;    Frames for IPX/SPX 
; FRAME TOKEN-RING_SNAP     ;    Frames for IP Frames 
; ODI.NSUP=YES              ;    Use with Novells ODINSUP

;[CARD]                     ;    This Section is for a Second card 
; PIO                       ;    Avoids DMA problems with memory managers
; IO=1a20                   ;    Specifies I/O Location

;[NETB]                     ;    This Section is for Netbios 
; TX.U.BUFFERS=25           ;    This is for Internal Buffer handling
; S=24                      ;    This is for Netbios Sessions Default is 4
; C=24                      ;    This is for Netbios Commands Default is 10

;[IPX]                      ;    This section is for IPX 
; SR=Y                      ;    This is for Source Routing
; CO=25                     ;    This is for Connections Default is 3
  
;[LLC]                      ;    This Section is for IEEE 802.2
; RX.SIZE=2130              ;    Default is frame size is 2130

;[ODI]                      ;    This section is for ODI 
; FRAME TOKEN-RING          ;    Frames for IPX/SPX  Frames
; FRAME TOKEN-RING_SNAP     ;    Frames for IP Frames 
; ODI.NSUP=YES              ;    Use with Novells ODINSUP

;----------------------------END OF SMART.CFG ------------------------------;