Installing the MDGND.DOS (NDIS2) driver

1. Copy the VINES LAN Software (DOS) Install disk to a directory on your workstation called C:\VINES. In this directory, run PCCONFIG.

2. From the main menu, select Network Card settings.

3. Select NDIS Token Ring. Type the Ringnode's interrupt setting. For the Bindings= option, type MDGND_NIF.

4. Save the configuration and return to the main menu.

5. Copy all the files in the NDIS directory on the VINES (DOS) Workstation disks to C:\VINES on your workstation.

6. Copy MDGND.DOS from the Madge release disk to C:\VINES.

7. Add the following lines to CONFIG.SYS: DEVICE=C:\VINES\PROTMAN.DOS /I: C:\VINES DEVICE=C:\VINES\MDGND.DOS

8. Add the following line to AUTOEXEC.BAT: BAN /NDTOKBAN

9. Ensure that the PROTOCOL.INI contains at least the information below.

   [PROTOCOL MANAGER]
    DRIVERNAME = PROTMAN$
         [VINES_XIF]
   	DRIVERNAME = NDISBAN$
   	BINDINGS = MDGND_NIF
     [MDGND_NIF]
   	DRIVERNAME = MDGND$

   Sample PROTOCOL.INI for VINES

10. Reboot the computer. MDGND.DOS is now installed.