Installing the MDGND.DOS (NDIS2) driver

Installing the MDGND.DOS (NDIS2) driver

To install MDGND.DOS:

  1. Run the LAN Manager SETUP program.

  2. Select Other Drivers, from the Network Adapter Drivers box. When prompted, insert the Madge release disk.

  3. Select "All Madge Smart 16/4 Ringnodes (Fastmac Plus)".

  4. Select the protocols you require, and continue through the SETUP process.

  5. Save the configuration and exit from SETUP.

  6. Reboot your computer.

[Back][Top]

[Using Madge Wizard][Ringnode Installation][Driver Installation][Ringnode Config and Diag][Additional Information]

____________________