Switch 4: ring speed

Switch 4: ring speed

Caution: Make sure that the ring speed you set matches the operation of your network. If it does not, you will impair the operation of your network.

If you are connecting the Ringnode to a 4Mbps network, set switch 4 to OFF. If you are connecting the Ringnode to a 16Mbps network, set switch 4 to ON. The default is OFF.

Switch 4Ring speed
OFF (Default)4Mbps
ON16Mbps

[Back]

[Using Madge Wizard][Ringnode Installation][Driver Installation][Ringnode Config and Diag][Additional Information]

____________________