Running TRCFGC.EXE using the command line

• To run the command-line configuration program (TRCFGC.EXE) using command-line options, boot your computer, and at the DOS prompt, type: TRCFGC

• Each command line must begin with the TRCFGC command, followed by the /IO= option, which specifies the I/O location of the Ringnode you intend to configure. You must specify the I/O location. For example:
  TRCFGC /IO=0A20 /8_BIT sets the Ringnode located at 0A20 to 8-bit mode.

• You can enter more than one command-line option at a time. For example:
  TRCFGC /IO=0A20 /4MBITS /OTHER sets the Ringnode to a ring speed of 4Mbps and to alternate ("OTHER") bus-timing mode.