Using the diagnostics program

To display Ringnode configuration information select the Ringnode in the "Ringnodes and Bridgenodes Found" box, and press [F6]. (You can use a mouse.)

The Table below is a quick reference guide to the diagnostics program:

Task	Action
To get help with the current screen	Press [F1]
To get a list of topics for which help is available	Press [F2]
To exit the current program and return to the DOS prompt	Press F3 and then press [Enter] to confirm.
To get information about the program, including copyright information.	Press [F10]
To cancel the current action or go back to the previous screen.	Press [Esc]
To select an option in a box. For example, to select a Ringnode in the "Ringnodes found" box.	Use ['Up arrow'] and ['Down arrow']
To perform an action listed on the screen.	Press the function key indicated, or use [TAB] to highlight an action and then press [Enter]
To move forward to a field on the screen. For example, to move to a list.	Press [Tab]
To move backward to a field on the screen. For example, to move to a list.	Press [Shift] + [Tab]